X-Fly Assembly Guide
X-Fly Assembly Guide
Introductions - X-Fly Assembly Guide:
“Welcome to the X-Fly Assembly Guide, your step-by-step resource to set up and maintain your drone. Whether you’re attaching the battery, mounting the optical flow deck, or replacing propellers, this guide will ensure a smooth assembly process. Follow the instructions carefully for a safe and efficient setup.”
•Safety Tips:
“Before starting the assembly, ensure you are working in a clean and safe environment. Always handle the components with care to avoid damage.”
•FAQs:
“Can I use third-party components for assembly?”
“We recommend using the original X-Fly components provided in the package for optimal performance.”
•Maintenance Tips:
“Regularly check the motor and propellers for wear and tear. A well-maintained drone ensures better performance and longevity.”
Attaching the LiPo Battery
1. Use 3M tapes to elevate the battery-holding deck. Ensure it is level with the top surface of the microcontroller
2. Connect the battery to the drone using the provided connector. Figure 4 – 3M Tape Attached on top of the Drone PC
3. Secure the battery onto the 3M tape, ensuring proper alignment and stability
Mounting the Optical Flow Deck
1. Align the arrows on the Optical Flow deck with those on the drone’s PCB.
2. Attach the Optical Flow deck to the bottom pin array of the drone’s PCB, ensuring the arrows remain matched.
Replacing Propellers
1. Using a flat edge, gently push the center of the propeller upwards while stabilizing the motor and its holders.
2. Align the center hole of the new propeller with the motor axle and press down gently until secured.
Replacing Motor
1. Remove the propeller and propeller guard.
2. Disconnect the motor connector from the PCB.
3. Gently pull the motor upwards from its holder.
4. Install the new motor, routing the connector cable appropriately.
5. Reconnect the motor connector.
6. Reinstall the propeller guard and propeller.
QubeBots Pvt Ltd is a startup that focuses on developing Edutech products to support the global STEM Education system.
Contact us
hello@qubebots.com
+94 77 069 5151
Colombo, Sri Lanka